Range corrected lidar signal and volume depolarisation ratio data from the Met Office's Raymetrics LR111-D300 lidar located at the Met Office observations enclosure near Portglenone, County Antrim, Northern Ireland. Data available from June 2018 onwards, though the instrument is only operated sporadically (see below for further details). This instrument is one of a suite of 10 Raman lidars deployed by the Met Office around the UK to complement a wider network of ceilometers within the "LIDARNET" upper air monitoring network. Returns from these instruments form a range of products for use in forecasting and hazard detection. The backscatter profiles can allow detection of aerosol species such as volcanic ash where suitable instrumentation is deployed. The primary aim of the Raman lidar network is the detection and quantification of volcanic ash aerosols during a volcanic event, and the network is only test fired only for a few hours each week. Outside of these times the lidars may be fired if there is a mineral dust outbreak or other such aerosol event of interest. The lidars will not fire if any precipitation is detected. Raman channel data are not presently available from this instrument in the CEDA archives.

Range corrected lidar signal and volume depolarisation ratio data from the Met Office's Raymetrics LR111-D300 lidar located at Loftus, North Yorkshire. Data available from June 2018 onwards, though the instrument is only operated sporadically (see below for further details). This instrument is one of a suite of 10 Raman lidars deployed by the Met Office around the UK to complement a wider network of ceilometers within the "LIDARNET" upper air monitoring network. Returns from these instruments form a range of products for use in forecasting and hazard detection. The backscatter profiles can allow detection of aerosol species such as volcanic ash where suitable instrumentation is deployed. The primary aim of the Raman lidar network is the detection and quantification of volcanic ash aerosols during a volcanic event, and the network is only test fired only for a few hours each week. Outside of these times the lidars may be fired if there is a mineral dust outbreak or other such aerosol event of interest. The lidars will not fire if any precipitation is detected. Raman channel data are not presently available from this instrument in the CEDA archives.

Range corrected lidar signal and volume depolarisation ratio data from the Met Office's Raymetrics LR111-D300 lidar located at a Met Office instrument enclosure near Rhyl, Denbighshire, on the North Welsh coast. Data available from June 2018 onwards, though the instrument is only operated sporadically (see below for further details). This instrument is one of a suite of 10 Raman lidars deployed by the Met Office around the UK to complement a wider network of ceilometers within the "LIDARNET" upper air monitoring network. Returns from these instruments form a range of products for use in forecasting and hazard detection. The backscatter profiles can allow detection of aerosol species such as volcanic ash where suitable instrumentation is deployed. The primary aim of the Raman lidar network is the detection and quantification of volcanic ash aerosols during a volcanic event, and the network is only test fired only for a few hours each week. Outside of these times the lidars may be fired if there is a mineral dust outbreak or other such aerosol event of interest. The lidars will not fire if any precipitation is detected. Raman channel data are not presently available from this instrument in the CEDA archives.

Range corrected lidar signal and volume depolarisation ratio data from the Met Office's Raymetrics LR111-D300 lidar located at the Met Office's Bishopton enclosure near Glasgow, Scotland. Data available from June 2018 onwards, though the instrument is only operated sporadically (see below for further details). This instrument is one of a suite of 10 Raman lidars deployed by the Met Office around the UK to complement a wider network of ceilometers within the "LIDARNET" upper air monitoring network. Returns from these instruments form a range of products for use in forecasting and hazard detection. The backscatter profiles can allow detection of aerosol species such as volcanic ash where suitable instrumentation is deployed. The primary aim of the Raman lidar network is the detection and quantification of volcanic ash aerosols during a volcanic event, and the network is only test fired only for a few hours each week. Outside of these times the lidars may be fired if there is a mineral dust outbreak or other such aerosol event of interest. The lidars will not fire if any precipitation is detected. Raman channel data are not presently available from this instrument in the CEDA archives.

Range corrected lidar signal and volume depolarisation ratio data from the Met Office's Raymetrics LR111-D300 lidar located at Camborne, Cornwall. Data available from June 2018 onwards, though the instrument is only operated sporadically (see below for further details). This instrument is one of a suite of 10 Raman lidars deployed by the Met Office around the UK to complement a wider network of ceilometers within the "LIDARNET" upper air monitoring network. Returns from these instruments form a range of products for use in forecasting and hazard detection. The backscatter profiles can allow detection of aerosol species such as volcanic ash where suitable instrumentation is deployed. The primary aim of the Raman lidar network is the detection and quantification of volcanic ash aerosols during a volcanic event, and the network is only test fired only for a few hours each week. Outside of these times the lidars may be fired if there is a mineral dust outbreak or other such aerosol event of interest. The lidars will not fire if any precipitation is detected. Raman channel data are not presently available from this instrument in the CEDA archives.

This dataset provides numbers and types of plastic particles extracted from sediment samples of three tributaries of the river Thames: the River Leach, the River Lambourn and The Cut. These rivers are regularly monitored for a range of water quality and biological characteristics as part of the ongoing CEH Thames initiative project. Four sampling sites were selected based on the average percentage of effluent present in the river and population equivalent density to represent scenarios ranging from low sewage input and population equivalent density (Leach and Lanbourn) through an intermediate site (the Cut) to a site with high sewage input and population equivalent density (also in the Cut). The samples were collected between late August and early September 2014. The data provides information on the site characteristics, dry weight of sediment analysed (in grams), number of microplastic particles extracted and characteristics of particles (including shape, colour and polymer type). Types of polymers identified include: polyethylene, polypropylene, polystyrene, polyvinyl chloride, polyethylene terephthalate, nylon and polyester. Full details about this dataset can be found at https://doi.org/10.5285/93837492-408f-4349-8dcd-ee833e84e47e