This dataset contains Global gas flaring activity from the Along Track Scanning Radiometer (ATSR) (1991-2012) and Sea and Land Surface Temperature Radiometer (SLSTR) (2017-2018) sensors. The data records have been processed to identify persistent thermal anomalies with spectral characteristics consistent with the combustion of natural gas during industrial gas flaring activities. Two different datasets are produced globally for each sensor type, one recording the activity and the other the sampling of these assumed gas flaring sites. The activity dataset records whenever a flare is up, i.e. is actively combusting, and provides a characterisation of the flares behaviour in terms of radiant heat output (in W). The determination of radiant heat output is achieved using the single channel SWIR radiance method of Fisher and Wooster (2018), based on the MWIR radiance method used extensively in the analysis of biomass burning. The sampling dataset records whenever a flaring site is seen by the satellite (irrespective of whether it is up or not) and also provides information on typical levels of cloud cover in the vicinity of the flare. The activity dataset contains information on the point location of the flare (accurate to within approximately ±1km) in the form of a lat/lon coordinate. Also provided is an index lookup that can be used to simply aggregate the flaring activity into arc-minute bins and these are referred to as lat_arcmin and lon_arcmin in the dataset. The sampling dataset is provided at the spatial level of the arc-minute binning only, and when merged onto the activity dataset long-term assessment of a flaring site can be performed. Such estimates of flaring activity over extended time periods for a given flaring site can be made by calculating the flare up-time (times seen actively flaring over time period or the expected number of cloud free overpasses for time period) and the mean radiant heat output of the flare for the same time period. The product of time period (in seconds), the estimated flare up-time and the mean radiant heat output provides an estimate of typical flare activity.

This dataset collection contains data from the Sea and Land Surface Temperature Radiometer (SLSTR) on the European Space Agency (ESA) Sentinel 3A satellite. Sentinel 3A was launched on 16th February 2016 and provides data globally. The primary mission objective of the SLSTR instrument is to extend the long-term consistent set of global Sea Surface Temperature (SST) measurements. In addition, SLSTR using a suite of visible and infrared radiance measurements provides land surface temperature, active fire monitoring, ice surface temperature, cloud, atmospheric aerosol, land surface, forestry and hydrology products in support of Copernicus services. Data are provided by ESA and are made available via CEDA to any registered user.

This dataset contains monthly-averaged land surface temperatures (LSTs) and their uncertainty estimates from the Sea and Land Surface Temperature Radiometer (SLSTR) on Sentinel 3B. Satellite land surface temperatures are skin temperatures, which means, for example, the temperature of the ground surface in bare soil areas, the temperature of the canopy over forests, and a mix of the soil and leaf temperature over sparse vegetation. The skin temperature is an important variable when considering surface fluxes of, for instance, heat and water. Daytime and night-time temperatures are provided in separate files corresponding to the morning and evening Sentinel 3B equator crossing times which are 10:00 and 22:00 local solar time. Per pixel uncertainty estimates are given in two forms, first, an estimate of the total uncertainty for the pixel and second, a breakdown of the uncertainty into components by correlation length. Also provided in the files, on a per pixel basis, are the observation time, the satellite viewing and solar geometry angles, a quality flag, and land cover class. The dataset coverage is global over the land surface. LSTs are provided on a global equal angle grid at a resolution of 0.01° longitude and 0.01° latitude. SLSTRB achieves full Earth coverage in 1 day so the daily files have gaps where the surface is not covered by the satellite swath during day or night on that day. Furthermore, LSTs are not produced where clouds are present since under these circumstances the IR radiometer observes the cloud top which is usually much colder than the surface. Dataset coverage runs from December 2018 to December 2020. There are minor interruptions (1-10 days) during satellite/instrument maintenance periods or instrument anomalies. The dataset was produced by the University of Leicester (UoL) and LSTs were retrieved using the (UoL) LST retrieval algorithm and data were processed in the UoL processing chain. The dataset was produced as part of the ESA Land Surface Temperature Climate Change Initiative which strives to improve satellite datasets to Global Climate Observing System (GCOS) standards.

This dataset contains land surface temperatures (LSTs) and their uncertainty estimates from the Sea and Land Surface Temperature Radiometer (SLSTR) on Sentinel 3B. Satellite land surface temperatures are skin temperatures, which means, for example, the temperature of the ground surface in bare soil areas, the temperature of the canopy over forests, and a mix of the soil and leaf temperature over sparse vegetation. The skin temperature is an important variable when considering surface fluxes of, for instance, heat and water. Daytime and night-time temperatures are provided in separate files corresponding to the morning and evening Sentinel 3B equator crossing times which are 10:00 and 22:00 local solar time. Per pixel uncertainty estimates are given in two forms, first, an estimate of the total uncertainty for the pixel and second, a breakdown of the uncertainty into components by correlation length. Also provided in the files, on a per pixel basis, are the observation time, the satellite viewing and solar geometry angles, a quality flag, and land cover class. The dataset coverage is global over the land surface. LSTs are provided on a global equal angle grid at a resolution of 0.01° longitude and 0.01° latitude. SLSTRB achieves full Earth coverage in 1 day so the daily files have gaps where the surface is not covered by the satellite swath during day or night on that day. Furthermore, LSTs are not produced where clouds are present since under these circumstances the IR radiometer observes the cloud top which is usually much colder than the surface. Dataset coverage starts on 17th November 2018 and ends on 31st December 2020. There are minor interruptions (1-10 days) during satellite/instrument maintenance periods or instrument anomalies. The dataset was produced by the University of Leicester (UoL) and LSTs were retrieved using the (UoL) LST retrieval algorithm and data were processed in the UoL processing chain. The dataset was produced as part of the ESA Land Surface Temperature Climate Change Initiative which strives to improve satellite datasets to Global Climate Observing System (GCOS) standards.

This dataset contains land surface temperatures (LSTs) and their uncertainty estimates from the Sea and Land Surface Temperature Radiometer (SLSTR) on Sentinel 3A. Satellite land surface temperatures are skin temperatures, which means, for example, the temperature of the ground surface in bare soil areas, the temperature of the canopy over forests, and a mix of the soil and leaf temperature over sparse vegetation. The skin temperature is an important variable when considering surface fluxes of, for instance, heat and water. Daytime and night-time temperatures are provided in separate files corresponding to the morning and evening Sentinel-3A equator crossing times which are 10:00 and 22:00 local solar time. Per pixel uncertainty estimates are given in two forms, first, an estimate of the total uncertainty for the pixel and second, a breakdown of the uncertainty into components by correlation length. Also provided in the files, on a per pixel basis, are the observation time, the satellite viewing and solar geometry angles, a quality flag, and land cover class. The dataset coverage is global over the land surface. LSTs are provided on a global equal angle grid at a resolution of 0.01° longitude and 0.01° latitude. SLSTRA achieves full Earth coverage in 1 day so the daily files have gaps where the surface is not covered by the satellite swath during day or night on that day. Furthermore, LSTs are not produced where clouds are present since under these circumstances the IR radiometer observes the cloud top which is usually much colder than the surface. Dataset coverage starts on 1st May 2016 and ends on 31st December 2020. There are minor interruptions (1-10 days) during satellite/instrument maintenance periods or instrument anomalies. The dataset was produced by the University of Leicester (UoL) and LSTs were retrieved using the (UoL) LST retrieval algorithm and data were processed in the UoL processing chain. The dataset was produced as part of the ESA Land Surface Temperature Climate Change Initiative which strives to improve satellite datasets to Global Climate Observing System (GCOS) standards.

This dataset contains monthly-averaged land surface temperatures (LSTs) and their uncertainty estimates from the Sea and Land Surface Temperature Radiometer (SLSTR) on Sentinel 3A. Satellite land surface temperatures are skin temperatures, which means, for example, the temperature of the ground surface in bare soil areas, the temperature of the canopy over forests, and a mix of the soil and leaf temperature over sparse vegetation. The skin temperature is an important variable when considering surface fluxes of, for instance, heat and water. Daytime and night-time temperatures are provided in separate files corresponding to the morning and evening Sentinel-3A equator crossing times which are 10:00 and 22:00 local solar time. Per pixel uncertainty estimates are given in two forms, first, an estimate of the total uncertainty for the pixel and second, a breakdown of the uncertainty into components by correlation length. Also provided in the files, on a per pixel basis, are the observation time, the satellite viewing and solar geometry angles, a quality flag, and land cover class. The dataset coverage is global over the land surface. LSTs are provided on a global equal angle grid at a resolution of 0.01° longitude and 0.01° latitude. SLSTRA achieves full Earth coverage in 1 day so the daily files have gaps where the surface is not covered by the satellite swath during day or night on that day. Furthermore, LSTs are not produced where clouds are present since under these circumstances the IR radiometer observes the cloud top which is usually much colder than the surface. Dataset coverage starts on 1st May 2016 and ends on 31st December 2020. There are minor interruptions (1-10 days) during satellite/instrument maintenance periods or instrument anomalies. The dataset was produced by the University of Leicester (UoL) and LSTs were retrieved using the (UoL) LST retrieval algorithm and data were processed in the UoL processing chain. The dataset was produced as part of the ESA Land Surface Temperature Climate Change Initiative which strives to improve satellite datasets to Global Climate Observing System (GCOS) standards.